CalCard is the market leader for electricians’ Ongoing Calibration Verification.
Buy CalCard direct from Original Equipment Manufacturer (OEM) – TestCal
Used by most competent electricians involved in the testing of electrical installations.
CalCard providing Ongoing Calibration Verification for the accuracy and consistency of test instruments.
This is specified by IET (Electrotechnical Assessment Specification EAS 15-362, July 2015).
This CalCard meets these criteria enabling the consistency check for the prime measurement of continuity and insulation instrumentation.
Fully approved and accepted by all Inspectorates and advisors: –
NAPIT, NICEIC, Electrical Safety First, Health and Safety Executive
CalCard the electricians choice for instrument ongoing calibration verification – www.myocv.co.uk
mr andrew j brown –
5.0 out of 5 stars
Readings are close enough
Worked great, readings are close enough
James –
5.0 out of 5 stars
Saves on having to get your meter calibrated every year
Very accurate test card, saves having to get my meters calibrated every year
4 people found this helpful
S R Parr –
5.0 out of 5 stars
Highly recommend cal card
Great cal card highly recommend for any electrical contractor for an on site tester check!
Treadingwater –
5.0 out of 5 stars
A must have for Sparkies.
Great bit of kit, fits easily into the case with Megger and has a key ring hole so you prevent it being list or “borrowed”.Only down side is the £1 charge if you want a PDF specimen test sheet to print off. Come on CalCard, really?Apart from that, the card is spot on.
Alan Kyle –
4.0 out of 5 stars
Essential for testing and confirming low ohms and IR tests.
Used this to calibrate my Kewtech KT65-DL mft. Works a treat, reassures your testing especially on low ohms ranges, and insulation testing. Guarantees repetitive readings. Ok it’s not as comprehensive as a proper calibration from a specialist company, but it’s a great second best.
3 people found this helpful
Alan Kyle –
4.0 out of 5 stars
Essential for testing and confirming low ohms and IR tests.
Used this to calibrate my Kewtech KT65-DL mft. Works a treat, reassures your testing especially on low ohms ranges, and insulation testing. Guarantees repetitive readings. Ok it’s not as comprehensive as a proper calibration from a specialist company, but it’s a great second best.
2 people found this helpful
GAry Bowles –
5.0 out of 5 stars
Five Stars
A simple and effective way to keep tracks of results on your tester
Treadingwater –
5.0 out of 5 stars
A must have for Sparkies.
Great bit of kit, fits easily into the case with Megger and has a key ring hole so you prevent it being list or “borrowed”.Only down side is the £1 charge if you want a PDF specimen test sheet to print off. Come on CalCard, really?Apart from that, the card is spot on.
michael cleary –
5.0 out of 5 stars
Excellent purchase.
If you are unsure as to the accuracy of your multimeter, this Calcard is what you need, the values of resistance do not vary so you can instantly see if you have an accurate meter on not. One very handy piece of kit.
2 people found this helpful
Jimi –
5.0 out of 5 stars
100% Recommend
Very useful addition to tester pouch to make sure your tester is operating within limits while carrying out eletrical testing. Calibration is still important to be done but this helps check that your tester is giving you acurate readings
2 people found this helpful
mr l j morris –
5.0 out of 5 stars
Five Stars
As discribed
Robin –
5.0 out of 5 stars
Five Stars
Quick and easy way to keep your tester in calibration. Saves that yearly expensive cost of calibration.
Robin –
5.0 out of 5 stars
Five Stars
Quick and easy way to keep your tester in calibration. Saves that yearly expensive cost of calibration.
mr malcolm mcmillan –
5.0 out of 5 stars
Five Stars
Easy to carry and confirm calibration
mr a. –
5.0 out of 5 stars
It does what it Says on the tin
Does as it should and shows me that my mft is as it should be.
Kris –
5.0 out of 5 stars
Five Stars
Good
mark barttelot –
5.0 out of 5 stars
Five Stars
Just as described n good delivery
Amazon Customer –
5.0 out of 5 stars
Usefull
Usefull for deciding if your tester is knackered.. or not.Turns out mine isnt. But that i have a dodgy test lead
One person found this helpful
B Man –
5.0 out of 5 stars
Better than calibration
Looks the part for when my yearly assessment comes round and I have to pretend to have been checking my tester every month
2 people found this helpful
James –
5.0 out of 5 stars
Saves on having to get your meter calibrated every year
Very accurate test card, saves having to get my meters calibrated every year
4 people found this helpful
Ian banks –
5.0 out of 5 stars
Easy to store
Great bit of kit.
One person found this helpful
mickelec –
5.0 out of 5 stars
Five Stars
Perfect, does exactly as required for minimal outlay.
Megan –
5.0 out of 5 stars
Works as should
Works well
Myles farrington –
5.0 out of 5 stars
What was ordered and did job
Recomend
Gavin –
5.0 out of 5 stars
One to have
Great tool and a good size.
mickelec –
5.0 out of 5 stars
Five Stars
Perfect, does exactly as required for minimal outlay.
Justin Hopkins –
4.0 out of 5 stars
Handy to carry
Fits in the case without taking up room for the leads
Aidas –
5.0 out of 5 stars
Handy tool
Does the job
Ian D Littlechild –
4.0 out of 5 stars
Good
An essential addition to my MFT box.
B Man –
5.0 out of 5 stars
Better than calibration
Looks the part for when my yearly assessment comes round and I have to pretend to have been checking my tester every month
2 people found this helpful