Your own PDF Printable record sheet on which to write your results, format record sheet.
This enables you to write your record sheet to your name and instruments. Entering and recording your results.
CalCard the market leader for elctricians Ongoing Calibration Verification
Fully approved and accepted by all Inspectorates.
Enabling compliance to Ongoing Calibration Verification (OCV).
Extending Instrument Calibration from 1 to 3 years
%20Calibration%20Checkbox&url=https://calcard.co.uk/product/calcard/&media=https://calcard.co.uk/wp-content/uploads/2024/02/Product-CalCard-in-Hand-1024x1024.png){kind=link}
Mark Page –
Cheaper than regular calibration costs for domestic use
Convenient checking of IR tester operation
Zenon Swatek –
Does what it should
Does what it should
mark barttelot –
Five Stars
Just as described n good delivery
Adam –
Excellent little gadget!!
Great little gadget for checking your tester is accurate. Small enough to fit in your box with your tester but big enough for it to be easy to use. The only negative is I think it is slightly overpriced, I think it should be no more that £15.
5 people found this helpful
Colin –
Simple calibration
Simplicity of use and compact size
ETP –
Highly recommended.
Does the job beautifully and takes up no space.
The Wonderer –
Five Stars
What every sparkx needs.
M. Rahman –
Cheapest i could find online works well every time not …
Cheapest i could find online works well every time not sure what the taped on section on the back is for.
Amazon Customer –
Very quick delivery
Arrived next day and does its job as advertised
Karen Smith –
Great price, and fast delivery
Great price, and fast delivery
One person found this helpful
ETP –
Highly recommended.
Does the job beautifully and takes up no space.
sparkypc –
ideal daily check
very useful
Mike S –
Necessary piece of kit.
Once you know where you are with your test gear it gives you a lot of confidence your near the mark. A vintage AVO with a analogue display was found to be really accurate. Just goes to show…
3 people found this helpful
Jimi –
100% Recommend
Very useful addition to tester pouch to make sure your tester is operating within limits while carrying out eletrical testing. Calibration is still important to be done but this helps check that your tester is giving you acurate readings
2 people found this helpful
S R Parr –
Highly recommend cal card
Great cal card highly recommend for any electrical contractor for an on site tester check!
Megan –
Works as should
Works well
Mike S –
Necessary piece of kit.
Once you know where you are with your test gear it gives you a lot of confidence your near the mark. A vintage AVO with a analogue display was found to be really accurate. Just goes to show…
3 people found this helpful
Treadingwater –
A must have for Sparkies.
Great bit of kit, fits easily into the case with Megger and has a key ring hole so you prevent it being list or “borrowed”.Only down side is the £1 charge if you want a PDF specimen test sheet to print off. Come on CalCard, really?Apart from that, the card is spot on.
Ian banks –
Easy to store
Great bit of kit.
One person found this helpful
ETP –
Highly recommended.
Does the job beautifully and takes up no space.
Zenon Swatek –
Does what it should
Does what it should
Clive Giddings –
Five Stars
MFT resistance confirmed.
GAry Bowles –
Five Stars
A simple and effective way to keep tracks of results on your tester
Alan Kyle –
Essential for testing and confirming low ohms and IR tests.
Used this to calibrate my Kewtech KT65-DL mft. Works a treat, reassures your testing especially on low ohms ranges, and insulation testing. Guarantees repetitive readings. Ok it’s not as comprehensive as a proper calibration from a specialist company, but it’s a great second best.
2 people found this helpful
Myles farrington –
What was ordered and did job
Recomend
Mark Page –
Cheaper than regular calibration costs for domestic use
Convenient checking of IR tester operation
GAry Bowles –
Five Stars
A simple and effective way to keep tracks of results on your tester
Zenon Swatek –
Does what it should
Does what it should
Seanpress –
It does the job
Not bad, woth havingCould be a lot cheaper
Frank –
Good
Good
Amazon Customer –
Usefull
Usefull for deciding if your tester is knackered.. or not.Turns out mine isnt. But that i have a dodgy test lead
One person found this helpful
Kris –
Five Stars
Good
mr l j morris –
Five Stars
As discribed
mr malcolm mcmillan –
Five Stars
Easy to carry and confirm calibration
Frank –
Good
Good
Agent smith –
Small an compact
A great piece of kit to use with my Megger
dale ellis –
Works fine
Works as described
Greenman –
Smalll size
Perfect to confirm reading in test equipment
Robin –
Five Stars
Quick and easy way to keep your tester in calibration. Saves that yearly expensive cost of calibration.
mr andrew j brown –
Readings are close enough
Worked great, readings are close enough
Amazon Customer –
Usefull
Usefull for deciding if your tester is knackered.. or not.Turns out mine isnt. But that i have a dodgy test lead
One person found this helpful
michael cleary –
Excellent purchase.
If you are unsure as to the accuracy of your multimeter, this Calcard is what you need, the values of resistance do not vary so you can instantly see if you have an accurate meter on not. One very handy piece of kit.
One person found this helpful
mickelec –
Five Stars
Perfect, does exactly as required for minimal outlay.
mr malcolm mcmillan –
Five Stars
Easy to carry and confirm calibration
Robin –
Five Stars
Quick and easy way to keep your tester in calibration. Saves that yearly expensive cost of calibration.
mr a. –
It does what it Says on the tin
Does as it should and shows me that my mft is as it should be.
Clive Giddings –
Five Stars
MFT resistance confirmed.
Kris –
Five Stars
Good
michael cleary –
Excellent purchase.
If you are unsure as to the accuracy of your multimeter, this Calcard is what you need, the values of resistance do not vary so you can instantly see if you have an accurate meter on not. One very handy piece of kit.
One person found this helpful
Kris –
Five Stars
Good
Jimi –
100% Recommend
Very useful addition to tester pouch to make sure your tester is operating within limits while carrying out eletrical testing. Calibration is still important to be done but this helps check that your tester is giving you acurate readings
2 people found this helpful
mr malcolm mcmillan –
Five Stars
Easy to carry and confirm calibration
mark barttelot –
Five Stars
Just as described n good delivery
Agent smith –
Small an compact
A great piece of kit to use with my Megger
Karen Smith –
Great price, and fast delivery
Great price, and fast delivery
One person found this helpful
Mike S –
Necessary piece of kit.
Once you know where you are with your test gear it gives you a lot of confidence your near the mark. A vintage AVO with a analogue display was found to be really accurate. Just goes to show…
3 people found this helpful
Greenman –
Smalll size
Perfect to confirm reading in test equipment
Frank –
Good
Good
Agent smith –
Small an compact
A great piece of kit to use with my Megger
Greenman –
Smalll size
Perfect to confirm reading in test equipment
James –
Saves on having to get your meter calibrated every year
Very accurate test card, saves having to get my meters calibrated every year
4 people found this helpful
Robin –
Five Stars
Quick and easy way to keep your tester in calibration. Saves that yearly expensive cost of calibration.
Justin Hopkins –
Handy to carry
Fits in the case without taking up room for the leads
Myles farrington –
What was ordered and did job
Recomend
Adam –
Excellent little gadget!!
Great little gadget for checking your tester is accurate. Small enough to fit in your box with your tester but big enough for it to be easy to use. The only negative is I think it is slightly overpriced, I think it should be no more that £15.
5 people found this helpful
Ian banks –
Easy to store
Great bit of kit.
One person found this helpful
dale ellis –
Works fine
Works as described
mickelec –
Five Stars
Perfect, does exactly as required for minimal outlay.
B Man –
Better than calibration
Looks the part for when my yearly assessment comes round and I have to pretend to have been checking my tester every month
2 people found this helpful
M. Rahman –
Cheapest i could find online works well every time not …
Cheapest i could find online works well every time not sure what the taped on section on the back is for.
mickelec –
Five Stars
Perfect, does exactly as required for minimal outlay.
Adam –
Excellent little gadget!!
Great little gadget for checking your tester is accurate. Small enough to fit in your box with your tester but big enough for it to be easy to use. The only negative is I think it is slightly overpriced, I think it should be no more that £15.
5 people found this helpful
mr l j morris –
Five Stars
As discribed
Mark Page –
Cheaper than regular calibration costs for domestic use
Convenient checking of IR tester operation
mr a. –
It does what it Says on the tin
Does as it should and shows me that my mft is as it should be.
Colin –
Simple calibration
Simplicity of use and compact size
Megan –
Works as should
Works well
Amazon Customer –
Very quick delivery
Arrived next day and does its job as advertised
Megan –
Works as should
Works well
sparkypc –
ideal daily check
very useful
Myles farrington –
What was ordered and did job
Recomend
Ian G. –
Five Stars
Really useful to check electrical meters before use and after, check of calibration.
Clive Giddings –
Five Stars
MFT resistance confirmed.
sparkypc –
ideal daily check
very useful
Gavin –
One to have
Great tool and a good size.
Colin –
Simple calibration
Simplicity of use and compact size
Treadingwater –
A must have for Sparkies.
Great bit of kit, fits easily into the case with Megger and has a key ring hole so you prevent it being list or “borrowed”.Only down side is the £1 charge if you want a PDF specimen test sheet to print off. Come on CalCard, really?Apart from that, the card is spot on.
Karen Smith –
Great price, and fast delivery
Great price, and fast delivery
One person found this helpful
M. Rahman –
Cheapest i could find online works well every time not …
Cheapest i could find online works well every time not sure what the taped on section on the back is for.
Aidas –
Handy tool
Does the job
James –
Saves on having to get your meter calibrated every year
Very accurate test card, saves having to get my meters calibrated every year
4 people found this helpful
Ian G. –
Five Stars
Really useful to check electrical meters before use and after, check of calibration.
Aidas –
Handy tool
Does the job
Gavin –
One to have
Great tool and a good size.
The Wonderer –
Five Stars
What every sparkx needs.
Gavin –
One to have
Great tool and a good size.
mr a. –
It does what it Says on the tin
Does as it should and shows me that my mft is as it should be.
Ian D Littlechild –
Good
An essential addition to my MFT box.
The Wonderer –
Five Stars
What every sparkx needs.
mr l j morris –
Five Stars
As discribed
Treadingwater –
A must have for Sparkies.
Great bit of kit, fits easily into the case with Megger and has a key ring hole so you prevent it being list or “borrowed”.Only down side is the £1 charge if you want a PDF specimen test sheet to print off. Come on CalCard, really?Apart from that, the card is spot on.
GAry Bowles –
Five Stars
A simple and effective way to keep tracks of results on your tester
S R Parr –
Highly recommend cal card
Great cal card highly recommend for any electrical contractor for an on site tester check!
Aidas –
Handy tool
Does the job
B Man –
Better than calibration
Looks the part for when my yearly assessment comes round and I have to pretend to have been checking my tester every month
2 people found this helpful
Amazon Customer –
Usefull
Usefull for deciding if your tester is knackered.. or not.Turns out mine isnt. But that i have a dodgy test lead
One person found this helpful
Ian banks –
Easy to store
Great bit of kit.
One person found this helpful
James –
Saves on having to get your meter calibrated every year
Very accurate test card, saves having to get my meters calibrated every year
4 people found this helpful
dale ellis –
Works fine
Works as described
mark barttelot –
Five Stars
Just as described n good delivery
mr andrew j brown –
Readings are close enough
Worked great, readings are close enough
Jimi –
100% Recommend
Very useful addition to tester pouch to make sure your tester is operating within limits while carrying out eletrical testing. Calibration is still important to be done but this helps check that your tester is giving you acurate readings
2 people found this helpful
mr andrew j brown –
Readings are close enough
Worked great, readings are close enough
B Man –
Better than calibration
Looks the part for when my yearly assessment comes round and I have to pretend to have been checking my tester every month
2 people found this helpful
K Freeman –
Very useful
Very useful for keeping an eye on your tester.
One person found this helpful
michael cleary –
Excellent purchase.
If you are unsure as to the accuracy of your multimeter, this Calcard is what you need, the values of resistance do not vary so you can instantly see if you have an accurate meter on not. One very handy piece of kit.
One person found this helpful